Two Armoires We Completed Recently

We finished the armoires. They were very simple to build. And since we configured/built them as two pieces (top and bottom), they are easy to move. The drawers provide ample storage. Due to cost constraints, the drawer sides were machined from MDF or Plywood. Not my favorite choices, but they seemed to have held up very well.

They are finished with four coats of a 50/50 mix of Polyurethene and Naptha that we rubbed on. The finish has a moderate sheen and great depth.

Here are a few pictures of the finished armoires:





Picture 1
arm1
Picture 2
arm2
Picture 3
arm4
Picture 4
arm6
Picture 5
arm7
Picture 6
arm8




Picture 7
arm9
Picture 8
arm5
Picture 9
arm7
Picture 10
arm8
Picture 11
arm9